Error No.1: Monitor led is blinking

Solution: Check all the connections like Monitor Cable, Data cables, RAM, Display Card, CPU Connections etc.

Error No.2: Continuous Three Beeps

Solution: Problem in RAM Connection.

Error No.3: Three Beeps (i.e. 1 long and 2 short)

Solution: Problem in Display Card Connection

Error No.4: Three long Beeps Period wise

Solution: Problem in BIOS or RAM

Error No.5: Continuous non-stop Beeping

Solution: Key Board Problem (i.e. some key is pressed for longer time)

Error No.6: NO display on the screen

Solution: Hard Disk cable connected wrongly.

Error No.7: Power led is off

Solution: Check main power cord; check S.M.P.S; check motherboard connection

Error No.8: Showing CMOS Error

Solution: Replace 3 Volt Battery of motherboard; set original setting manually; enter your search form terms, submit search form

Error No.9: Showing HDD error or Hard Disk Failure

Solution: Check power cord; Check connection of HDD; Check Data Cable; Check Hard Disk parameters in CMOS or Auto detecting setting partitions by Fdisk command, then format it to set track 0.

Error No.10: Mother Board hangs due to unstabilized power supply

Solution: Check S.M.P.S; RAM not functioning properly; Software problem i.e. using pirated software; CPU fan not functioning properly

Error No.11: Dancing Screen

Solution: Check display card connection; virus problem; video memory problem

Error No.12: Shaking Screen 

Solution: Earthing problem; Magnetic waves comes around

Error No.13: CPU cabinet shock

Solution: Check Earthing; Check main power cord

 Error No.14: Hard Disk making noise while processing
 
Solution: Unstabilized power supply; check for loose contact; do not use Y connectors for Hard Disk because it may create bad sector or weak Hard Disk.

Error No.15: Hard Disk hangs while processing

Solution: Check for bad sectors by using CHDISK or SCANDISK command. If found format the hard disk and set partition before that area. (Note: This is the only procedure to use hard disk with bad sector or to avoid bad sectors use standard power supply)

Error No.16: Hard Disk not detected

Solution: Check power connector; check Data cables; check jumpers

Error No.17: Partition not shown

Solution: Operating System where the Hard Disk formatted is not supported with present Mother Board
Error No.18: Windows Registry error

Solution: This will happen due to sudden ON/OFF of the system. Final solution is to Reinstall OS.

Error No.19: Display colour doesn’t match

Solution: Configure Display Card properly or reset the setting

Error No.20: Unknown Device found

Solution: Driver Utility may not be provided with OS. For this install driver for the device.
Axact

Axact

Vestibulum bibendum felis sit amet dolor auctor molestie. In dignissim eget nibh id dapibus. Fusce et suscipit orci. Aliquam sit amet urna lorem. Duis eu imperdiet nunc, non imperdiet libero.

Post A Comment:

0 comments: